ScaleShield High Ph Cleaner
Product Data Sheet:
ScaleShield High Ph Cleaner is a heavy duty action high pH liquid cleaner that quickly and easily mixes with water to make an easy to use cleaning solution that effectively removes a wide range of organic particulates such as silt, colloids, organics, biogrowth, and other acid-insolubles from reverse osmosis (RO) and nanofiltration (NF) membrane elements. The unique formulation helps eliminate the need for hydrogen peroxide, formaldehyde, and other membrane disinfectants as a post or pretreatment to membrane cleaning.
Use alongside ScaleShield LpH Cleaner for a comprehensive cleaning.
Effectively Controls:
Features
Removes organics and particulates.
Heavy-duty action broad-spectrum cleaning.
Removes silt, colloids, organics, bio-growth,
and other alkali soluble foulants.
Liquid formulation for ease and safety of
mixing.
Compatible with RO, NF, and UF
membranes from all major manufacturers.
Certified under NSF/ANSI Standard 60 for
drinking water production.
Dilution Ratio
Perform a thorough low-pressure system flush. Prepare each cleaning solution as a 1:40 mixing ratio of neat cleaner to final prepared cleaning solution by filling the CIP tank with the appropriate volume of permeate or DI water, then adding chemical while mixing or circulating in the tank. If the system is undrained post-flush, assume approximately 4 gal of water remains in each 8”x40” membrane element (1 gal per each 4”x40”). Rinse completely after each cleaner.
Specs
Appearance:
Colorless to
Light Brown Liquid
Product pH (neat):
11.0 ± 0.9
Application
Clean when the train’s normalized productivity has decreased 15% from clean operation. Soak and circulation
times will vary based on membrane condition. Monitor and maintain recommended pH throughout cleaning by adding neat chemical, if necessary. Document each step with results to empirically fine-tune your procedure.
Packaging
Liquid: 5 gal (20 kg), 55 gal (220 kg),
220 gal (834 kg), 275 gal (1042 kg), Bulk